Circutor DCP-96 Aac, Инструкция по эксплуатации

Страница: 14 / 30

14
DCP-96 Aac
Instruction Manual
5�2�- THREE-PHASE NETWORK MEASURE WITH 3 OR 4 WIRE
The
DCP-96 Aac
has 2 display screens in the three-phase network measurement system with a 3 or
4 wire connection, see
“6.1.1.- MEASUREMENT SYSTEM”, Table 8
.
Use the keys and to browse through the different screens.
The display screens can change automatically depending on the time programmed in the section
“6.2.1.- CYCLIC DISPLAY
”.
The initial display screen, i.e. the first screen displayed when feeding the device or when exiting the
configuration menu, can be programmed in section
“6.2.3.- INITIAL DISPLAY SCREEN”
�
Table 9:Display menu: Three-phase network measuring�
Display menu: Three-phase network measuring
5011
L1
5012
5013
A
L2
L3
.
.
.
Current (A)
5000
Hz
.
Frequency
(Hz)
If the input current value higher than a % of the nominal value, the device can make the digits on the
display start flashing, in the form of a light alarm. See
“6.2.5.- LIGHT ALARM”