Circutor DCP-96 Aac, Инструкция по эксплуатации

Страница: 16 / 30

16
DCP-96 Aac
Instruction Manual
Note:
The password can be modified, see
“6.2.4.- ACCESS PASSWORD”
�
With a long keystroke (>3s), press to validate the data.
If the password entered is incorrect, the
Err
message will appear for a few seconds and the device
will return to the password configuration screen,
Figure 8
.
6�1�- CONFIGURATION OF THE INPUT
Figure 9
, shows the input configuration menu from which the measurement system and the primary
and secondary current are configured.
Measurement system
Primary current
Save configuration
Secondary current
inpt
nEt
n34
.
inpt
Ct 1
0005
.
.
A
k
inpt
Ct 2
0005
.
A
SAuE
>3s
>3s
>3s
>3s
inpt
nEt
n34
.
inpt
Ct 1
0005
.
.
A
k
inpt
Ct 2
0005
.
A
SAuE
no
Figure 9: Input configuration menu�
6�1�1�- MEASUREMENT SYSTEM
In this screen we can configure the measurement system used in the installation.
inpt
nEt
n34
.
>3s
inpt
nEt
n34
.
With a long keystroke (>3s), press to access the value’s configuration.
Use the keys and to browse through the different options:
n34
, three-phase network measuring with 4-wire connection.
n.33
, three-phase network measuring with 3-wire connection.
n.12
, single-phase measuring.
With a long keystroke, press to validate the option.
Use the keys and to browse through the menu screens.