Circutor Compact DC 2, Инструкция по эксплуатации

Страница: 47 / 78

47
Instruction Manual
COMPACT DC
On this screen you can configure the following parameters:

TopologyLog:
Topology log enabled or disabled.

NameTopology:
Name of the file.

IpFtpTopology:
IP address of the server for downloading the topology log.

DestDirTopology: Path of the server for downloading the topology log.

UserFtpTopology: Username of the server for downloading the topology log.

PwdFtpTopology: Password of the server for downloading the topology log.

MaxLinesTopology: Maximum number of lines.

TimeWaitTopology:
Maximum wait time, in seconds.
5�8�- METERS MENU: INTRUDER LIST
The
COMPACT DC
may detect energy meters that are not electrically connected to the same distribu-
tion lines as the COMPACT DC .
Figure 52:Intruder list�
To define which energy meters should not be connected to the device, you can create a list of energy
meters which should not be connected to the
COMPACT DC
on the
Intrusion list
screen, using the MAC
address of each energy meter.
Figure 53
shows an example S10 file which lets you send a batch list of energy meters with a specific
MAC that are not to be connected to the concentrator.
<Report IdRpt=”S10” IdPet=”0” Version=”3�1�c”>
<Cnc Id=”XXX0000000000”>
<S10 Fh=”20130109171554000W” Mac=”00:80:E1:00:87:7E”/>
<S10 Fh=”20130109171554000W” Mac=”00:80:E1:00:87:7F”/>
</Cnc>
</Report>
Figure 53:S10 example file�
Another way to indicate intrusive energy meters is to add them individually by clicking the
Add
button
and entering the MAC address.