41
Instruction Manual
CIRWATT B 400
CiErr
dESAct
4�2�3�2 - Special programming menu
Allows changing those parameters that require breaking the seal on the sealable key. Such is the case
with transformer ratios or the integration period for load curves.
4�2�3�3 -Reset Menu
All programmed parameters and stored data are deleted. The totalizers are reset to zero. The date and
time, battery status and the manufacturer's fixed parameters are maintained.
The following default parameters are restored:
Link address:
1
Address of metering point:
1
Keys :
1
Baud rate at every port:
9600 bauds
Configuration of every port:
8N1
Change of seasons:
Automatic
This function is always done locally and is protected by the seals on the terminal cover and the key. A
reset event is generated.
The following message is shown on the screen:
PUESt
A CEro
