Circutor CIRWATT B 400, Инструкция по эксплуатации

Страница: 37 / 52

37
Instruction Manual
CIRWATT B 400
Table 17:Identifying Screens�
Screen OBIS Description
L46 Ident
0
.
00
.
5
LINK ADDRESS
0
.
00
.
6
METERING POINT ADDRESS
0
.
00
.
7
DATE OF COMMUNICATIONS PROTOCOL VERSION: (DD-MM-YY)
, displays the
ASDU 142 information of the protocol
0
.
02
.
0
DEVICE FIRMWARE VERSION : displays the ASDU 142 information of the
protocol
0
.
08
.
4
INTEGRATION PERIOD OF THE FIRST LOAD CURVE : shows the integration
period in minutes, by default, 60 minutes.
0
.
08
.
5
INTEGRATION PERIOD OF THE SECOND LOAD CURVE
: shows the integration
period of the second load curve in minutes, by default, 15 minutes.
L47 Screen (INFORMATION: OUTPUT CONSTANTS)
This screen shows information on the pulse values of the outputs. Since these data do not correspond
to any specific contract, but are general to all of them, the B field takes the value 0.
Table 18:Output constants screens
Screen OBIS Description
L47 Saida
0
.
03
.
3
OUTPUT 1
0
.
03
.
4
OUTPUT 2
0
.
03
.
5
OUTPUT 3
0
.
03
.
6
OUTPUT 4
The options for each type of output are:
Ax Y:
x = 1: active imported / x = 2: active exported / Y = pulse weight
Rx Y :
x = quadrant number (reactive quadrant x) / Y = pulse weight
Vh Y :
Vh impulse output (average of 3 phases) / Y = impulse weight
Pot:
Maximeter
C x P y :
x = contract number / y = tariff period number (output indicates the tariff)
L48 Screen (INFORMATION: TIME CHANGE)
This screen shows information on the dates of the time changes. Since these data do not correspond
to any specific contract, but are general to all of them, the B field takes the value 0.
Table 19:Time change screens�
Screen OBIS Description
L48 C Hor
0
.
00
.
8
WINTER-SUMMER TIME CHANGE
: It indicates the date and time of the
winter/summer time change
0
.
00
.

SUMMER-WINTER TIME CHANGE
: It indicates the date and time of the
summer/winter time change