Circutor CEM-C31-485-DS, Инструкция по эксплуатации

Страница: 38 / 58

When this screen is displayed:
Short press the
button to return to the first configuration
point of the display (
“ 6.2.7.1. PARTIAL ENERGY DISPLAY”
)
Long press the button to jump to the next programming
point.
6�2�8� BACKLIGHT
This is the home screen for selecting the backlight operating mode
of the screen in those units that feature it.
Long press to view the different options:
This screen shows the different options:
On
: Backlight always ON.
Off
: Backlight always OFF.
005 SEC
...
120 SEC
: ON time after the last press of the buttons.
Short press the button to browse the different options.
To validate the data, long press the button and the validation screen will appear (
Figure
18
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown in
Figure 18
, it returns to the main programming
screen of the Backlight .
Short press the button to access the next programming step.
6�2�9� ENERGY COST
Note: It is only displayed if the efficiency factors display has been selected.
This is the home screen for entering the energy cost per kWh.
Long press the button to view the value to be programmed.
38
CEM-C31
Instruction Manual