Circutor CEM-C31-485-DS, Инструкция по эксплуатации

Страница: 23 / 58

5.4.- PARTIAL ENERGY DISPLAY
Note:
The partial energy display menu is only displayed if the partial energy display option has
been selected in the setup menu (see
“ 6�2�7�1� PARTIAL ENERGY DISPLAY”
)
Long press the key in the standby mode screen to open these display screens. Short press
the key to display the partial energy main screen,
Figure 13
.
Figure 13: Partial energy main screen�
Long press the button to open the different screens. Short press the button to browse the
different screens (see
Table 12 and Table 13
).
The PAR icon on the display indicates that you are viewing the partial energies.
Long press the button to exit the Partial energy screens.
The standby mode is activated again when no button is pressed for 60 seconds.
Table 12:Partial energy screens (Table 1)�
Models CEM-C31-T1, CEM-C31-485-T1, CEM-C31-485-DS
(Impulse count option
(8)
)
Screen Parameters
Partial imported active energy
Partial exported active energy
Only displayed in the 4-quadrant version.
Partial reactive energy, quadrant 1 (L+)
(9)
Partial reactive energy, quadrant 2 (L-)
(9)
Only displayed in the 4-quadrant version.
23
Instruction Manual
CEM-C31