6
CDP
Application notes
1�- INTRODUCTION
KOSTAL offers several inverter models that can be managed via the
CDP
Dynamic power con-
troller,
specifically they are:
PIKO IQ 4�2-10
PIKO 10-20
PIKO 36 EPC
For the
CDP
controller to be able to correctly manage the inverter, communication between the
two devices must be correct and both products must be
correctly
programmed.
These application notes are not meant as a substitute for the
CDP
or
inverter manuals, but rather as additional support for individuals who
need to interconnect the two devices.
Even so, the guides and manuals of each product should be consulted and each company is
responsible for providing technical support.
An inverter from the
KOSTAL PIKO
family of inverters will be used as the model in these ap-
plication notes.
NOTE:
Images and information on the inverter are taken from the official documents and manuals pro
-
vided by the manufacturer.
NOTE:
The test has been conducted using the KOSTAL PIKO 10.1 inverter, s.n.90391MEF00014,
HW:040350 SW:04.03