– 5 –
NO. ITEM
DESCRIPTION
1
LCD Display
3-3/4 digit 3200 count LCD Display
2
RANGE Button
Indicated by
on the LCD display. Overrides the Auto Ranging
feature. Starts with displaying the lowest range in manual mode. This
function works for AC/DC Volts, AC/DC Current and Ohms mode.
3
Power Button
Power ON/OFF push button switch
4
Temperature Jack
Plug in 'K' type thermocouple observing the polarity
5
20A Jack
Positive input jack to plug in red test lead for 20A measurement only.
6
µA/mA Jack
Positive input jack to plug in red test lead for current measurement
up to 326mA
7
/ Button
When the function switch is turned to / , use this pushbutton to
select between continuity and diode tests
8
HOLD Button
The displayed data will freeze and
will appear on the LCD.
Changes in the input signal will not change the display.
9
FUNCTION Switch
Function Switch to select measurement mode
10
Test Lead Input
Indicating LEDs
Lighted LED indicates the correct jack to plug in the test lead for the
selected function. LED will turn off after the test lead is fully inserted.
If the test lead is incorrectly plugged in, the LED will start blinking
and buzzer will sound.
11
V/ / / Jack
Positive input jack to plug in red test lead for voltage, resistor, diode
and continuity check.
12
Jack
Plug in black test lead in all measurement modes, common ground
TEMP
POWER
CIRCUIT-TEST
DMR-4350
20A
RANGE
µA/mA
HOLD
1000 VDC
750 VAC
CAT III 600V
CAT II 1000V
FUSED
320mA
MAX
500V
MAX
for 15 sec MAX
every 30 min
AUTO
POWER
OFF
FUSED
20A MAX
!
!
!
V/Ω/ /
Ω
/
COM
TRUE RMS
F°
C°
DCV
ACV
µA
mA
20A
µA
mA
20A
TE
M
P
AC A
MP
S
D
C A
M
PS
VOLTS
O
HM
S
12
11
10
9
8
7
6
5
4
3
2
1
FRONT PANEL DESCRIPTION
