CIRCUIT DESIGN STD-601, Руководство по эксплуатации

Страница: 8 / 28

OPERATION GUIDE
OG_STD-601B_v40e Circuit Design, Inc.
8
Terminal Terminal Input/ Input/Output level (V)
Internal equivalent circuit
No. name Output Low Hi
8-10 GND
- - -
GND terminal.
All the GND terminals should be connected to a
wide GND plane.
11 NC Do not connect.
12 NC Do not connect.
13 RXD
Input 0 to 0.15 Vcc -0.4 to Vcc
UART input terminal
Make sure to perform communication with the
bit rate previously set.
* Can be changed with the command (See 10.8
"@U" UART bit rate setting ).
Default settings for UART
communication
Bit rate 19.2 kbps *
Data length 8 bits
Parity none
Stop bits 1 bit
14 TXD
Output 0 to 0.4 Vcc x 0.67 to Vcc
UART output terminal
Make sure to perform communication with the
bit rate previously set.
* Can be changed with the command (See 10.8
"@U" UART bit rate setting ).
Default settings for UART
communication
Bit rate 19.2 kbps *
Data length 8 bits
Parity none
Stop bits 1 bit