CIRCUIT DESIGN MU-1 RS232C interface kit, Руководство по эксплуатации

Страница: 14 / 15

OG_MU1-RIK_v20e Circuit Design, Inc. 13
OPERATION GUIDE
1. Devise ways of isolating the unit as far as possible from noise from other embedded equipment and from other
sources of noise.
2. Arrange the system equipment so that it will not be covered by the operator’s hand or the like.
3. The MU-1 does not have a waterproof structure. If the antenna is located outside the main unit, use a structure
that prevents water droplets from entering the case.
The program that controls the MU1-RS2 (MU-1 + MU1-RS2IF) is a program that accesses the COM port.
The method of developing a program is basically the same as for the MU-1, except for accessing a virtual COM port.
Refer to “Chapter 5 How to Develop a Program” in the MU-1 Operation Guide.
Chapter 5 How to Develop a Program
4.3 Cautions