Circor GLH8L-462 Series, Инструкция и список запасных частей

Страница: 12 / 15

16. Place O-ring (12) in groove of cover (50). Mount cover (50) to inlet head (37) using capscrews (51).
Torque capscrews (51) to 193 lbs. ft. (± 10 lbs. ft.).
17. Install tubing (53) to elbow fittings (52). Install drain plug (19) in cover (50).
18. Install key (54) in slot of power rotor (22) shaft. Mount pump hub of coupling. Lock coupling hub to power
rotor (22) shaft by installing nut (55) and setscrew (56). Tighten setscrew.
19. Mount assembled pump (approximately 2490 pounds) on bedplate. Verify pump and driver alignment as
outlined in Manual CA-1.
10