Circontrol CCL-eHOME T1C16, Инструкция по эксплуатации и монтажу

Страница: 6 / 44

© CIRCONTROL
www.circontrol.com
Wallbox eHOME INSTRUCTION & INSTALLATION MANUAL
3
1 INTRODUCTION
This manual contains all the necessary information for the safe use of the Wallbox
eHOME Electric Vehicle (EV) charging system and it will help you to get the best
performance results from the system.
This equipment incorporates the latest technology and offers the most advanced
service in the EV charging market.
1.1 IMPORTANT SAFETY INFORMATION
Read carefully all the instructions before starting, to
ensure the proper installation of the charging point.
The charging point is designed for installation in indoor and outdoor areas. Whatever
is the case, the unit must be installed safely with the adequate electrical protections.
•
The charging point must not be installed in areas where there is a
potential risk of explosions.
•
Do not install the charging point where falling objects may damage the
equipment.
•
The wall surface where the charging point is placed must withstand the
mechanical forces.
•
Do not use this unit for anything other than electric vehicle charging
modes which are expected in IEC 61851.
•
Do not modify this unit. If modified, CIRCONTROL will reject all
responsibility and the warranty will be void.
•
Comply strictly with electrical safety regulations.
•
Do not make repairs or manipulations with the unit energised.
•
Only trained and qualified personnel should have access to low-
voltage electrical parts inside the device.
•
Check the installation annually by qualified technician.
•
Remove from service any item that has a fault that could be dangerous
for users (broken plugs, caps that don’t close...).
•
Use only Circontrol supplied spare parts.
•
Do not use this product if the enclosure or the EV connector is broken,
cracked, open, or shows any other indication of damage.