CipherLab RS51, Справочное руководство

Страница: 140 / 209

140
RS51 Mobile Computer
Item Description
Wi-Fi Frequency Band
Select Automatic , 5 GHz only , or 2.4 GHz only for your Wi-Fi
frequency band. The default setting is Automatic.
Enable Roaming Select whether to enable Wi-Fi roaming or not.
Roaming Trigger
The signal strength when triggering Wi-Fi roaming. The higher
value means the sensitivity of triggering roaming is higher.
Roaming Delta
The qualification for roam candidates. The higher value means
the signal strength of candidate APs should be higher than the
current connected AP.
Enable Fast Transition Enable 802.11r Fast Transition feature.
Background Scan Interval
The frequency of background scan when the device does not
connect the internet. The shorter time means the scanning
frequency is higher.
Set Country Code Select the Wi-Fi country code for your device.
Enable WLAN Blacklist
Deny the Wi-Fi AP (access point) which is failed to access for
several time, and add the denied AP to the blacklist.
Wi-Fi Connection Timeout
The device retains network connection and takes a while to
wait for the response from the Wi-Fi till the device cannot
reconnect to the previously connected Wi-Fi AP.
Set Timeout Value
Once “Wi - Fi Connection Timeout” is enabled, you can further
set the timeout value.
Captive Portal Detection
To determine Internet connectivity when the device connects
to a network.
IP Reachability Monitor
Confirm whether the gateway or DNS server can be
unreachable.
Channel Selection
Select the Wi-Fi channel(s) to narrow down frequency band
of the 2.4GHz (802.11b/g/n) or 5 GHz (802.11a/n).
Reset to Default Restore all the settings in “Cipherlab Propruetary” to default.