CipherLab 9500CE Series, Справочное руководство

Страница: 24 / 131

14 9500CE Reference Manual
Keypad Settings
first, and then
Š The LED backlight of keypad is turned off by default. It can be toggled ON/OFF by
the key combination: [Func] + [0].
Start > Settings > Control Panel and double-tap the Keyboard icon
Š
The Character Repeat functionality is enabled by default. You may cancel the check
box to disable it. When enabled, tap, hold, and drag the slider for a desired Repeat
Delay and Repeat Rate.
Warning: Using backlight while on battery power will substantially reduce battery
life. It is suggested to turn on the keypad backlight while working in a dark
area.
Task Key
For OS version 1.0 and later, the [Task] key can be programmed as a shortcut key
for a specific program or action. By default, it is undefined.
Note: Only for OS version 0.9, the [Task] key is set to trigger Windows Explorer .
Alpha Key
This alphanumeric keypad is set to numeric mode by default. The Alpha key serves
as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case
alphabetic) modes.
Note: It is not necessary to hold down the [Alpha] key.
The alpha icon will appear on the status bar in a sequence as shown below.
Status Icon Alpha Key Input Mode
N/A Numbers
Press one time
Small letters
Press two times
Capital letters
Note: If you are using the software keypad via SIP, tap CAP (Caps Lock) to toggle
between upper case and lower case alphabetic modes.