CIOKS / Eventide PowerFactor 2 power supply underneath or on top of a Pedaltrain board.
Page 7
Here we show it in the most left top corner of a PT-2 model. Other positions are of course also possible, just
use minimum three screws to fasten the power supply to the board.
Prior to top mounting you should remove the detachable rubber feet from the power supply. Use the
template to mark the three holes indicated with yellow on the template for mounting of the power supply
flush with the back of the pedal board. Drill the holes and fasten the unit using just the screws. For top
mounting you don’t need the spring washers nor the stand-offs.
Go to the next page to see the step-by-step mounting guide of the MAda universal mains adapter, and how
it can be used to power one or two plug-in adapters using the courtesy AC mains outlet of PowerFactor 2 or
any CIOKS link range power supply.
