
R599870 - Force 4K User Manual
FUNCTION
32
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norwegian, Russian and Chinese.
12.0
fUnCTIon
12.1
Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
•
Off: 12V trigger voltage state is always low.
•
Power: 12V trigger state is high when the projector is powered ON. To be used with motorized screens.
•
Anamo: 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with motorized
anamorphic kits.
•
Inst. Mode 1 up to 10: 12V trigger state is high when the selected Installation Mode is the same as the Mode
number configured.
12.2
off-Timer
You can configure this automatic power Off function that will switch off the projector when there is no operation
or after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.
12.3
eCo Mode
This setting when set to On will minimizes the power consumption in the Standby Mode. Additionally, it will
automatically switch Off whenever the input signal is interrupted for 20 min. Must be Off to operate this unit from
Standby Mode with RS-232, LAN communications or Control4 protocols.
12.4 Network
When the Communication Terminal selected is LAN, this unit will be visible on the local Network and the following
parameters need to be configured. Refer to next section for more info.
12.5
Remote Code a or b
Select in the projector menu the code A or B according to the code selected on the RCU. You can change the code
used by the RCU to communicate with the projector from A to B. To do so, press and hold for 3 sec simultaneously
[MENU]+[BACK] buttons on the RCU. All the buttons on the RCU will blink.
•
Two blinks indicate that B code is used.
•
Three blinks indicate that A code is used.
12.6
Hide Mode
This setting is used to temporarily hide the current image by switching Off the Laser alimentation. You can also
use the [Hide] button on the RCU to set this function.
12.7 Factory Reset
Confirm to reset all this unit settings to default settings at once.
12.8 Software Update
Confirm to start the update procedure. Make sure that a valid software file must be loaded on an USB stick and
that this stick is fully inserted in the USB/Update input located at the rear of this unit.
Содержание R599870
Страница 1: ...R599870...
Страница 42: ...R599870 Force 4K User Manual 42...
Страница 43: ...R599870 Force 4K User Manual 43...
Страница 44: ......