4.0 REMOTE CONTROL UNIT (RCU)
R599740 - BlackWing Two User Manual
17
•
Push the battery body towards the spring and lift up to remove.
Insert two AAA size batteries, making sure the polarities match the + and - marks inside the battery
compartment.
•
Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until
it clicks in place.
4.3
How to use the remote control unit
The operable distance of the remote control unit is about 7m for direct reception and within 30 degree angle with
respect to the sensor.
C
AUTION
WHEN
USING
BATTERIES
Do not mix new and old batteries.
Do not mix different type of batteries as they are different in characteristics.
Insert batteries according to the + and - marks on the battery case.
Do not put batteries into fire or recharge them if they are not design to.
Remove the batteries if the remote control is not to be used for a prolonged period.
Use manganese batteries wherever possible, Do not use rechargeable batteries.
N
OTICE
If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.
When this happens, replace the batteries. Insert the batteries according to the + and - marks.
The remote control unit can be used by having the transmission signal reflected off a screen, as the effect of
signals reflected from the RCU differ with the type of screen used, operable distance may decrease.
Front InfraRed sensor
Back InfraRed sensor
