Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 25 / 44

INSTALLATION
R599850 - BW MK2015 User Manual 25
Lens Memory Save
Store into an available memory the lens focus, zoom and shift configuration. There are 5 memories for
Blackwing One model and 10 memories for the BW 2&3.
Lens Memory Name Edit
You can edit the Lens Memory Name within the limit of 10 characters. Same procedure as section “User Name
Edit”, page 19.
Lens Center
Reset the lens position to the original, central position.
Lens Cover (BW 2&3)
Control the behavior of the Lens Cover:
• Auto: the lens cover opens or closes when the projector switches On or Off.
• Open: the lens cover is always open.
10.2 Pixel Adjust
The pixel adjustment is extremely fine: each color can be adjust within 1/16 pixel steps on 121 individual
adjustment zones.
Adjust
Enable the pixel adjustment on Memory 1, Memory 2 or Off.
Adjust Area
Whole: the entire screen is selected for adjustment.
Zone: the screen is divided into 121 adjustment zones.
Adjust Color
Select the color to adjust: Red or Blue.
Adjust Pattern Color
Select a pattern to help the pixel alignment. Settings: White or Green+adjusting Color. Yellow for red, Cyan for
blue.
Adjust (Pixel)
This function is enable when the Adjust Area is set to Zone only. You can adjust the selected color position
horizontally and vertically by 1-pixel steps.
• H settings: -2 +2
• V settings: -2 +2.
Adjust (Fine)
Use this function to move the selected color within smaller steps.
• H settings: -31 +31
• V settings: -31 +31
Reset
Reset all pixel adjustments to default factory settings.
RCU SHORTCUTS DURING PIXEL ADJUSTMENT:
[GAMMA] button on the RCU switches adjust color parameter between Red and Blue.
[PIC. ADJ.] button on the RCU switches the adjust area parameter between whole and zone. At the same
time, the zone cursor will appear on the adjust pattern.
[COLOR SPACE] button on the RCU changes the adjust pattern from white to green+adjust color.
Use the [COLOR TEMP] button on the remote control to change adjustment method from Pixel to Fine
tune and switch to the fine tune window.
[BACK] button will exit the Pixel Adjust mode.