Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 19 / 44

PICTURE ADjUST
R599850 - BW MK2015 User Manual 19
There are 12 Color profiles for 2D inputs and 7 for 3D inputs, depending on the selected picture mode, you may
choose an available color profile preset:
• Film1 available with Film Picture Profile, uses the Xenon filter and adjusted to Eastman Kodak film tone
• Film2 available with Film Picture Profile, uses the Xenon filter and adjusted to Fujifilm film tone.
• Film3 available with Film Picture Profile, uses the Xenon filter and adjusted to Technicolor film tone.
• Standard will bring rich and saturated colors found in HDTV, available with almost any selected Picture Mode.
• Cinema1 available with Cinema Picture Profile and adjusted to HDTV standards
• Cinema2 available with Cinema Picture Profile and adjusted to DCI standards.
• Anime1 best suited to Hollywood animes.
• Anime2 best suited to Japanese animes.
• Video color profile is best suited to TV and Sport programs.
• AdobeRGB color profile adjusted to Adobe RGB standard.
• Stage best suited to live concert.
• x.v.Color matches the color space of x.v.Color standard.
7.2 Advanced Picture Mode
Clear Black
Smooth out the black areas to obtain clear zone by eliminating electronic white noise in these areas. Turn it Off
or set the correction to Low for a mild effect or High for a strong effect.
Lamp Power
Set the lamp power used by the current Picture Profile:
Low: lamp is set to 180W
High: lamp is set to 230W.
To avoid any damage to the lamp, you shouldn’t change the lamp power within 90 seconds from the
projector startup or 60 seconds after lamp power change.
Lens Aperture
The lens is equipped with a variable electronic aperture. This function is used with a real time analysis of the
video picture projected that optically adjusts the light output depending on the viewing conditions by controlling
the aperture dynamically: when set to Auto 1, the iris will automatically be set to the optimal opening. Auto 2, the
curve is altered so that the gradation is more visible. The Manual setting lock the iris to a fixed position, adjust to
the best aperture from partially closed (-15) to fully opened (0).
User Name Edit
You can edit the picture modes names User1 to 4 using a maximum length of 10 characters. You can use
alphabet letters, numbers and symbols:
User Name Edit
MENU
BACK
>>
Name User 1
Clear
All Clear OK
Exit
Select
Operate
Picture Adjust
SPACE
Select cursor
Input cursor
Character list
a) Select the user name you want to edit from User1 to User5. Press [OK] to enter the edit mode.
b) The input cursor displays the place where the new character will be insert. It moves automatically as a
character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.
c) Press [BACK] to exit edit mode.
Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specific
character.