Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 27 / 44

DISPLAY SETUP
R599850 - BW MK2015 User Manual 27
without altering the global picture settings. You may select the best template available in the Screen No.
a) 001 - 009: select a profile between 001 and 009 when watching 3D content with 3D shutter glasses. Profile
001 is recommended when using Cineversum’s active IR 3D-glasses.
b) 010 to 106: select the best compensation profile depending on your screen and environment.
• Screen size: diagonal size in inches set this setting between 60” and 200”.
• Viewing distance is the distance to the screen of the nearest seat in meters, set it between 1m and 10m.
• Wall color, select “Dark” if the walls are black or similar, for any lighter shades select “Light”.
11.0 DISPLAY SETUP
Back Color
Configures the screen color displayed when there is no active input. Set to Blue or Black.
Menu Position
Upper left, Upper right, Center, Lower right, Lower left.
Signal Display
On: Display the source of the input signals after input selection.
Off: Don’t display.
Logo
On: Display D-ILA logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norwegian, Russian and Chinese.
12.0 FUNCTION
12.1 Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
• Off: 12V trigger voltage state is always low.
• On (Power):12V trigger state is high when the projector is powered ON. To be used with motorized screens.
• On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with
motorized anamorphic kits.
12.2 Off-Timer
You can configure this automatic power Off function that will switch off the projector when there is no operation
or after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.
12.3 ECO Mode
This setting when set to On will minimizes the power consumption in the Standby Mode. Additionally, this product
will automatically switch Off whenever the input signal is interrupted for 20min. The power consuption is reduced
from 4.8W down to 0.4 in Standby Mode when Eco Mode is activated.
12.4 Network
When the Communication Terminal selected is LAN, this unit will be visible on the local Network and the following
parameters need to be configured. Refer to section “16.2 LAN protocol”, page 37 for more details.