Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 26 / 44

R599850 - BW MK2015 User Manual
INSTALLATION
26
Installation Style
Flip the image to the left or right, up or down according to the projection state of the projector:
Front, Ceiling Mount (F), Rear or Rear Ceiling mount (R)
10.3 Keystone (Vertical)
Compensate for trapezoidal distortion caused by installation. Independently to the screen orientation, make sure
that the projector is not tilt more than 5% up/down.
• Vertical Keystone from -16 to +16.
10.4 Pincushion
Compensate distortions that may appear with curved screens or anamorphic setups.
NB: When a 3D signal is fed or when Keystone is used, the Pincushion correction cannot be set.
10.5 Anamorphic (works with 3D signal)
• Off: No modification to original picture.
• Mode A: The picture is vertically stretched to fit an installation with anamorphic lens. A cinemascope picture
is stretched to completely fill the panels without black bands, using the optimum resolution and brightness.
Anamorphic Mode A.
• Mode B: This setting squeezes horizontally the picture to fit a 16:9 image into cinemascope screen. This
setting is to be used with an anamorphic installation where the lens is permanently fixed in front of the unit
and to watch 16:9 content in its original format.
Anamorphic Mode B
10.6 High Altitude Mode
Select this when the projector is in a location of low atmospheric pressure. On or Off
10.7 Environment Setting
Turn On or Off the Environment setting. If set to On and to finely tune the picture, you may change the environment
settings so that they match your installation:
• Screen Adjust: This setting corrects the color balance derived from the reflective characteristics of the screen