Cineversum Black Wind Four R599782, Руководство пользователя

Страница: 25 / 48

6.0 MENU AND PICTURE SETTING
R599782 - Blackwing Four User Manual 25
• Normal: Standard tones
• Gamma A: rich dark tones.
• Gamma B: for film and movie projection.
• Gamma C: for film and movie projection with more detailed blacks than setting B.
• Gamma D: this setting is recommended for bright midtones and Computer like projection.
• Custom1
• Custom2
• Custom3
The Custom data can be set to:
• Correction Value: a unique value that will act as a gamma coefficient between 1.8 and 2.6.
• Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.
• Copy: copy the adjusted values to temporal memory.
• Paste: paste values stored in memory to current profile.
• Reset: reset to the default 2.2 gamma coefficient.
Gamma Adjustment can be copied from all modes. Paste can only be used for Custom modes.
Advanced
6.2.0.1 Sharpness
The Sharpness function is used to adjust the image sharpness of the picture. Adjust
the Sharpness value between 0 (soft) and 100 (sharper).
6.2.0.2 Detail Enhancement
Detail Enhancement function is used to improve the picture quality. You can set it
from -50 to 50.
6.2.0.3 Noise Reduction (SD video only)
DNR: Digital Noise Reduction. You can set it from 0 up to 16 to reduce the image
noise.
MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise on
the picture, generally found in compressed digital video signals such as television
broadcast or encoded movies. Adjust the MNR value from 0 up to 16 to reduce the
typical broadcast picture mosquito noise
BNR: Block Noise Reduction uses a large portion of the picture to reduce the digital
noise, this ensures a higher quality filter. Adjust the BNR value to On or Off.
6.2.0.4 CTI (SD video only)
Color Transition Improvement. Set it to Off, Low, Middle or High to reduce the color
smear (color contour correction). Caution: this function may alter the original picture
chrominance.
6.2.0.5 Color Management (TSL adjustments)
The Color Management gives the installer an unique calibration ease with the
integrated Color Adjustment menu: each primary and secondary color can be
independently calibrated to obtain a precise color balance in a snap.
Adjust the Red, Green, Blue, Yellow, Cyan and Magenta Tints, Saturations and
Luminances and store them into Custom1, Custom2 or Custom3 profiles.
6.2.0.6 Crystal Motion Drive (120Hz)
The Crystal Motion function uses a 120Hz video processing to render a smooth and
clear motion for movies shot at 24Hz or HD movies at 60Hz. Set the correct level
between low and high for 1080p24Hz movies or Film mode input to obtain a clear
image.
Lens Aperture
The lens is equipped with a variable electronic aperture. This function is used to optically adjust the light output
depending on the viewing conditions and the light ambiance. Adjust from the correct aperture from partially closed
to fully opened.
Reset