Cineroid CL800
FULL COLOR LED LIGHT
System
①
Connect the ballast to be used as master and the
ballast to be used as slave by using RJ45 cable.
②
In mode, specify master ballast and slave ballast.
(Access : Mode - System set - DMX Set - Sync Maseter
or Sync Slave)
③
When master ballast is operated, slave ballast is
operated together. The current mode is displayed at
the top of the screen.
Master / Slave
3
You can control multiple CL800 simultaneously by
operating one CL800.
①
Connect the DMX controller to the CL800 Ballast
using an XLR 5pin cable.
②
Set the DMX channel you want to use.
(Access : Mode - System set - DMX Set - DMX)
③
Set the DMX mode. The functions of the selected
mode from the selected channel are sequentially
assigned to the channel. The current mode is
displayed at the top of the screen.
DMX
DMX 512 channels and DMX controllers can be
used to control multiple CL800s simultaneously.
MASTER Unit [%]
DMX
SYNC MASTER
SYNC SLAVE
DMX-5
Unit [%]
CH 97:
CH 98:
CH 99:
CH 100:
START
CHANNEL
=
97
DIM
RED
GREEN
BLUE
DMX MODE 5
4
