8. Choose Install Set – Here you will choose “MRAID With Driver”. Click next to continue.
9. Choose Alias Folder – Default setting is “On the Desktop”. Click next to continue.
10. Pre-Installation Summary – Verify Settings. Click next to continue.
11. Install Complete – Congratulations! MRAID has been successfully installed. Click next to
continue.
12. Click Done and reboot the system for the changes to take affect. Your system is now
configured to be used with your CineRAID EditPRO.
6.
Connecting Your EditPRO to Your System
Your EditPRO is equipped with 2 industry standard SFF-8088 Multi-Lane interface
ports. Connect cable from the raid conrtoller to the EditPRO. You will receive
SFF-8470 to SFF-8088 cables for the PCI-X solution or SFF-8088 to SFF-8088 cables
for the PCI-e solution. Ensure that both connectors are properly secured and
fastened. Most common issues are poor cable connections.
SFF8470
SFF8088
Note
: Do NOT over tighten thumbscrews
www.CineRAID.com
