5
LIGHTING PROCEDURES
If the burner flame goes out while the grill is operating, always turn gas control knob
to the `OFF` position and wait 5 minutes before attempting to re-light the grill.
Read the safety instructions in previous sections before lighting.
Turn control knob on the grill to the `OFF` position by turning clockwise until a positive stop
is felt.
Turn the LP tank gas valve completely counter-clockwise to open gas supply to the grill.
Open the control knob on the grill fully and immediately place a lighted match through the
lighting hole underneath the center of the grill.
If burner fails to light, turn control knob to `OFF` position and wait 5 minutes for unburned
gases to clear before attempting to light grill again.
Forcing control knob will damage valve.
WHILE OPERATING THE GRILL
DO NOT move the grill.
DO NOT leave the grill unattended
DO NOT obstruct the flow of combustion and ventilation air.
Keep any electrical supply cord and the fuel supply hose away from any heated
surfaces.
Keep area around the grill clean and clear of debris, combustible materials, gasoline
and other flammable vapours and liquids.
Turn off the gas at the supply cylinder while not actually in use.
