12
HB SERIES
Humisonic
TM
Automatic Humidity Control
Installation
Humisonic
TM
Adapter
1-2 cm
level sensor
Humisonic
TM
unit
Humisonic
TM
reservoir
Humisonic
TM
cable
Flexible hose
Float valve
Reservoir
4 lt (1 Gallon)
Cover Air-in hole
Humidity adjustment in incubators is for
providing adequate water loss from eggs
. Eggs need to lose between 13-16 % water depending
on the species during incubation period. Weighing your eggs during incubation is the most reliable way to find proper humidity level for
particular poultry species.
Different from temperature, short term humidity changes during incubation are not important. Keeping an average humidity (See Page 27)
during all incubation period is enough to achieve good results. However,
high humidity levels during hatching period (last 2-3 day) are
very important.
When the chicks start to hatch, inner membrane of egg dries quickly. This makes membranes harden and chick can stick to
shell. To prevent drying of membranes, humidity must be adjusted to high levels depending on species for last 2-3 day of incubation.
-
Connect Humisonic
TM
reservoir right side of the incubator.
-
Place stainless steel Humisonic
TM
unit into the bottom of the reservoir.
-
Use flexible hose to connect Water tank and Humisonic
TM
reservoir
-
Connect Humisonic
TM
cable to Humisonic
TM
adapter. Connect adapter to the control panel.
•
The float valve will keep water level 1 - 2 cm(.39-.79”) above water level sensor.
CAUTION!
Don’t use hard and lime-enriched water for humidifier system and for humidity tray. Change humidifier disks
regularly. Humisonic
TM
humidifier units designed for on – off use. Leaving the unit on for prolonged periods of time will decrease
service life of unit and power adapter. Never attempt to close air-in hole on Humisonic
TM
reservoir cover.
