CIGWELD MPM 20/600 I-PS, Генераторный агрегат

Страница: 4 / 18

3
For service intervals consult the ENGINE USE AND SERVICE manual and the
SPECIFICATION.
ADJUSTMENTS AND REGULATIONS
All necessary controls are located on the main control panel and are properly explained
in the section FRONT PANEL DESCRIPTION.
We advise the operator against tampering with the engine or the internal electrical
components.
Note: Modification of the normal parameters can compromise the reliability of the
machine.
PROLONGED STANDING PERIODS
If the machine has to be stopped for a long period (more than one year), we suggest to
leave the motor oil and the fuel in and the water in the radiator in order to avoid
oxidising effects.
When the machine is to be used, the liquids must be replaced, the battery must be
charged; the belts, pipes and rubber hoses must be checked and a visual inspection of the
electrical connections must be done.
SCRAPPING
In order to preserve the environment, it is advised to dispose of the oil, fuel and battery
in an approved manner. For the complete range of materials, see the list below:
FERROUS and NON-FERROUS MATERIALS:
steel, cast iron, aluminium, copper, brass are used in the structure of engine,
alternator, transformers, etc.
PLASTIC MATERIALS:
rubber, bakalite, epovit, lexan are used for the instruments, engine pipes,
junction boxes and connectors, fuel tank, fuel cap, wheels, anti-vibration
dampers, condenser housings, fans, belts, filters and hoses.
ELECTRONIC MATERIALS:
various components, diodes, resistors, electronic panels.
VARIOUS MATERIALS:
rock wool, sound proofing materials.
LIQUIDS:
fuel, gasoline, cooling liquids, battery acid.