TRANSTIG 220AC/DC AND 300AC/DC POWER SOURCE
Manual 0-5293
3-21
INSTALLATION, OPERATION AND SETUP
• Set all the required GTAW welding parameters. Using the Welding Mode button (10) and the
Welding Type button (17).
Do NOT select TipTronic mode (14) at this stage.
As an example, we may select HF, AC, 4T Pulse GTAW (LED’s 18, 21, 16 and 12 will be illuminated.
• Press the SAVE button (54).
The display will how the Job Number identification, the job set and job number.
• Use the Multi Function Control (24) to select the job set number and the job number.
• Press and hold the SAVE button (54) until all LED’s illuminate briefly to indicate a Save has
been completed.
Note that you can interrupt the Save process, by simply briefly pushing the SAVE button (54)
Load a TipTronic Job
•
Using the Welding Mode button (10) select TipTronic mode (14).
•
Use the Multi Function Control (24) to select the job set number and the job number.
Set a TipTronic Job as Inactive
•
Press the SAVE button (54).
The display will how the Job Number identification, the job set and job number.
•
Use the Multi Function Control (24) to select the job set number and the job number.
•
Press the GAS button (52).
•
The TipTronic job is now inactive. Note that the JOB LED (53) will extinguish.
•
To exit this mode, press the SAVE button (54).
Set a TipTronic Job as Active
•
Press the SAVE button (54).
The display will how the Job Number identification, the job set and job number.
•
Use the Multi Function Control (24) to select the job set number and the job number.
•
Press the GAS button (52).
•
The TipTronic job is now active. Note that the JOB LED (53) will illuminate.
•
To exit this mode, press the SAVE button (54).
Copy a TipTronic Job to another Job Number
•
Using the Welding Mode button (10) select TipTronic mode (14).
•
Use the Multi Function Control (24) to select the “source” job set number and the job number.