Ciga SLD3 107 Скачать руководство пользователя страница 5

CARE, STORAGE, REPAIR AND RECYCLING

1). It is essential to protect this device against damp, direct sunlight, shock,

and vibrations. This device is not waterproof.

2). Do not keep and do not use the device near heaters or naked flames.

3). Remove the batteries if the device is to be stored for an extended

period of time. Leakage of batteries can cause damage to the device.

Keep the batteries out of reach of children!

4). Keep the device clean and away from dust. Use only a soft, dry cloth

to clean the device.

5). Avoid any contact with water, solvent, alcohol and petrol.

6). Keep the cuff away from sharp objects and do not try to stretch or twist

the cuff.

7). Do not drop or knock the device.

8). Repairs can only be made by the manufacturer.

9). The device should be checked and maintained after 2 years of use.

10.) Neither the device nor the batteries are household waste; follow your

local recycling rules and dispose of them at appropriate collection sites.

11). The Cuff should only be cleaned when necessary. The fabric should

be cleaned with cotton wool and a 3% solution of hydrogen peroxide.

After long use, partial discoloration of the fabrics covering the cuff may

occur. The cuff must not be laundered or ironed.

11

4

3). The correct measurement of arterial pressure can be difficult in patients

with deep arteriosclerosis, a weak pulse, and in patients with irregular

heart beats. In these situations a qualified healthcare professional should

interpret your blood pressure readings.

4). In order to get accurate

blood pressure readings

patients should be in a

relaxed and quiet state.

The measurement of

blood pressure should

be carried out in a quiet

environment at room temperature. Eating for 1 hour or drinking alcohol

for 1.5-2 hours before the test, smoking, and other activities that affect

blood pressure should be avoided before taking readings.

5). To ensure accurate readings the cuff should be a good fit on the upper

arm. When fitted it should be possible to fit two fingers comfortably

between the arm and the cuff.

6). For accurate blood pressure readings an interval of at least 3 minutes

between readings should be allowed to restore the blood circulation.

Patients suffering from pronounced atherosclerosis, and those who have

suffered from diabetes over an extended period of time, require a longer

time interval between measurements (10-15 minutes) because the elasticity

of the vessels can be decreased significantly by these diseases. For a

more exact determination of blood pressure, take a series of 3 readings

and calculate the average.

Содержание SLD3 107









Отзывы: