ONT G-25A Hardware Installation Manual
309-12201-01 Rev. A: October 2006
Cambridge Industries Group Co. Ltd
13
-
If Data service has been enabled in the network, the DATA LED lights green.
-
If Data service has not been enabled in the network, the DATA LED will be off.
3.8.2
Activating the ONT
The ONT is placed into service remotely through the OLT. Services to the ONT are likewise
provisioned and turned up remotely through the PON network.
• If the GPON LED is lit green, indicating that the ONT is communicating with the PON network,
no further activation is necessary and you can proceed to Section 3.8.3: Verifying Services.
• If the GPON LED is OFF, contact the NOC to activate the line. You may be required to provide
or confirm the following information about the ONT: vendor, model number, serial number. Once
the ONT has been activated in the network, and the GPON LED is lit green, you can proceed to
Section 3.8.3: Verifying Services.
3.8.3
Verifying Services
Follow local practices to connect to each active service port in the ONT to confirm service
activation.
1.
Connect to each active phone jack to verify telephone numbers and services. Verify that the
OFFH LED lights green when a line is off hook.
2.
If video service is included in this installation, confirm that cable TV service is operating.
Verify that the VID LED is lit green.
3.
If Ethernet service is included in this installation, confirm that data is being received and
transmitted normally. On the Ethernet connector, verify that the Link LED is lit and that the
Activity LED flashes when Ethernet activity occurs.
