ONT G-25A Hardware Installation Manual
309-12201-01 Rev. A: October 2006
Cambridge Industries Group Co. Ltd
10
DANGER: Please make sure the wire pair connected is from/to the telephone. Using the
wire pair from/to the PSTN network falsely may cause damage to user and the device.
3.6
Connecting Ethernet Service
1.
Locate the premises’ Ethernet LAN cable.
2.
If the cable is not terminated, follow local practices to attach an RJ-45 connector. Table
shows Ethernet RJ-45 connector wiring information.
3.
Wrap the Ethernet cable clockwise onto the bracket to get the desired length.
4.
Plug the Ethernet cable into the ONT RJ-45 Ethernet port.
5.
Repeat step 2-4 as needed to connect additional Ethernet cables.
Pin Color
Signal
Pin Color
Signal
1 Orange/White
Tx
+
5 Blue/White Unused
2
Orange
Tx —
6
Green
Rx
—
3 Green/White
Rx
+
7 Brown/White
Unused
4 Blue
Unused
8 Brown
Unused
Table 8 Ethernet RJ-45 connector wiring pattern
3.7
Connecting Video Service
1.
Locate the premises’ coax video cable.
2.
If the cable is not terminated, follow local practices to attach a 75 Ohm type F coaxial
connector.
3.
Wrap the video cable clockwise onto the bracket to get the desired length.
4.
Plug the video cable into the ONT video port.
