Quick-start User Guide:
Stereo
Phono
Inputs
Audio Level
Display
Volume
Level Up
Volume
Level Down
ON/OFF
Switch
IR Receiver
Window
Hi/Lo Line
Level
Sensitivity
Switch
3.5mm
Jack Input
Fascia
Trim
Plate
Quick-start User Guide:
1. Switch on the AVID2 Amplifier via the Power Switch ( ) of either the main unit or the IR
remote control.
2. Ensure the volume level of the AVID2 is set to 0 using the volume controls on the main unit
or IR remote control .
3. Connect your media player/sound source either via Bluetooth or via wired connection (eg.
CD, DVD, MP3, laptop, etc) from its line level output or headphone output into the AVID2’s 2
x Stereo Phono inputs or the 3.5mm Jack input.
(Connecting cables are commonly available or may have been supplied as part of your
system by the installer).
4. Set the volume level on your media player to approximately half way and press PLAY. (NB.
Not all media players will feature their own volume control).
5. Using the volume level controls (of either the AVID2 main unit or IR remote control), increase
the volume level of the AVID2 amplifier to a clear and comfortable level for your audience.
(Maximum Volume Level = 20).
6. NOTE: If the volume level is still too low, further increase the volume level of the media player;
or where the audio signal is from a headphone output (which normally gives a lower signal
level), switch the Input Level Switch on the main AVID2 unit to ‘Lo’
.
Bluetooth
LED Indicator
