CiDRA SONARtrac 20924, Инструкции по переделке

Страница: 3 / 13

SONARtrac ™ Rework Instruction
RI00007 Rev: 02
Subject: Procedure for Replacement of Foundation
Fieldbus Board P/N 20924
Page 3 of 13
CiDRA Corporate Services 50 Barnes Park North Wallingford, CT 06492
Tel. 203-265-0035 Fax. 203-294-4211 www.cidra.com

Procedure A
The following procedure should be used if the transmitter is installed in a location that is not suitable for
electronics rework.
Tools Required:
Qty P/N Description Recommended Tools
1 Phillips Head Screw Driver, #2 Qty P/N Description
1 Flat Head Screw Driver, 2mm 1 5 in-lf
f
torque driver with 3/32-inch hex bit
1 3/32-inch Allen Hex Wrench 1 12 in-lf
f
torque driver with #2 Phillips bit
1 ESD Wrist Strap 1 18 in-lf
f
torque driver with #2 Phillips bit
1 25 in-lf
f
torque driver with #2 Phillips bit
Materials:
Item
No.
Qty Part No. Description
1 1 Kit, Foundation Fieldbus Board Assembly