CID X-TREME XBC60LF, Руководство пользователя

Страница: 19 / 52

X-treme Brush Cutter
January 2021
19
3.3 How To Start and Stop The Brush Cutter
Moving or engaging the cutter with bystanders in the area could result in
Death or Serious Injury. Before engaging cutter hydraulics, always make
sure the area is clear of bystanders.
1. Ensure attachment is secure and lock pins are fully engaged.
2. Ensure hydraulic hoses are locked to the skid steer’s hydraulic couplers.
3. Set skid steer engine RPM to slightly above idle.
4. Activate skid steer auxilary hydraulic circuit.
5. Once brush cutter is up to speed, increase skid steer engine to full throttle.
Ensure cutter is running smoothly.
Starting the Cutter
Your brush cutter is designed to run off the skid steer loader’s auxiliary
hydraulic system, and is activated and deactivated by a control in the
operator’s cab. The height and tilt functions of your brush cutter are operated
with the control handles or pedals in the cab. Consult your skid steer
operator’s manual for precise instructions regarding these functions.
Hydraulic Flow Requirements
When operating the cutter, set the skid steer throttle at a speed that will
produce the required flow. Your skid steer dealer can measure the flow
available on your machine and recommend a throttle setting that is compatible
with this attachment.
Brush Cutter Controls
DO NOT exceed the designed flow rate (GPM) of your brush cutter. Check
the specifications table on page 38 to see your specific models max GPM
setting.