CID 11-20 GPM Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 52

CID 11-20 GPM Series Скачать руководство пользователя страница 26

Standard & Heavy Duty Brush Cutters

January 2021

26

4.1 Maintenance Overview

The maintenance procedures described in this manual should only be carried out by

qualified mechanics who have been trained to repair this machine.

Some procedures require special tools and skills to complete. DO NOT attempt to
repair or perform service work on this machine unless you have the skills and tools
to do so. Contact your local dealer for maintenance and repair services.

Improper maintenance or modifications to the design or performance of this

machine will void the warranty. ONLY use genuine CID replacement parts on this
machine.

Obey the following safety instructions when servicing or repairing this machine.

Wear proper Personal Protective Equipment (PPE) while working on this machine,
which may include safety glasses, hard hats, steel toe boots, gloves, etc.

Ensure all jack stands, lifts and hoists are in good working condtion and have the
rated load capacity to support the load.

If servicing is performed while the brush cutter is attached to the skid steer, turn

engine off, set parking brake and chock wheels to prevent skid steer from moving.

Only perform service work in a well-lit area.

Allow the machine to cool down before servicing this machine. Hot oils can burn
your skin.

NEVER work under an unsupported cutter deck.

«
...
24
25
26
27
28
...
»

Содержание 11-20 GPM Series





















































Отзывы:

Нет отзывов