CIAT AQUACIAT POWER LD 602R-3500R, Инструкция по эксплуатации, Страница: 16 / 56

AQUACIAT
POWER
EN -
16
5.5 Set the schedule
The control incorporates two time schedules, where the first
one (OCCPC01S) is used for controlling the unit start/stop,
whereas the second one (OCCPC02S) is used for controlling
the dual setpoint (Setpoint 1 used in Occupied mode / Setpoint
2 used in Unoccupied mode).
The control offers the user the possibility of setting eight
occupancy periods where each occupancy period includes the
following elements to be defined:
ƒ
Day of the week: Select the days when the period is
occupied.
ƒ
Occupancy time ("occupied from" to "occupied to"): Set
occupancy hours for the selected days.
ƒ
Timed Override Extension: Extend the schedule if necessary.
This parameter can be used in the case of some unplanned
events. Example: If the unit is normally scheduled to run
between 8:00 to 18:00, but one day you want the air-
conditioning system to operate longer, then set this timed
override extension. If you set the parameter to "2", then the
occupancy will end at 20:00.
NOTE: Time override extension is available only with the
optional Energy Management Module.
To set the unit start/stop schedule
1. Go to the Main menu.
2. Navigate to the Configuration menu (logged-in users only)
and select Schedule Menu (SCHEDULE).
3. Go to OCCPC01S .
4. Select appropriate check boxes to set the unit occupancy
on specific days.
5. Define the time of occupancy.
6. When the time schedule is set, the selected period will be
presented in the form of the green band on the timeline.
7. Press the Save button to save your changes or the Cancel
button to exit the screen without making modifications.
①
Selection of days for the time schedule
②
Start/end of the schedule
③
Save
④
Cancel
⑤
Previous time period
⑥
Next time period
IMPORTANT: Only logged-in users are allowed to access
the Configuration menu.
Each program is in unoccupied mode unless a schedule time
period is active.
If two periods overlap and are both active on the same day, the
occupied mode takes priority over the unoccupied period.
Example: Schedule setting
Hour MON TUE WED THU FRI SAT SUN HOL
0:00 P1
1:00 P1
2:00 P1
3:00
4:00
5:00
6:00
7:00
P2 P2 P3 P4 P4 P5
8:00 P2 P2 P3 P4 P4 P5
9:00 P2 P2 P3 P4 P4 P5
10:00 P2 P2 P3 P4 P4 P5
11:00 P2 P2 P3 P4 P4 P5
12:00 P2 P2 P3 P4 P4
13:00 P2 P2 P3 P4 P4
14:00 P2 P2 P3 P4 P4
15:00 P2 P2 P3 P4 P4
16:00 P2 P2 P3 P4 P4
17:00 P2 P2 P3
18:00 P3
19:00 P3
20:00 P3 P6
21:00
22:00
23:00
MON: Monday
TUE: Tuesday
WED: Wednesday
THU: Thursday
FRI: Friday
SAT: Saturday
SUN: Sunday
HOL: Holiday
Period / Schedule Starts at Stops at Active on (days)
P1: Period 1 0:00 3:00 Monday
P2: Period 2 7:00 18:00 Tuesday
P3: Period 3 7:00 21:00 Wednesday
P4: Period 4 7:00 17:00 Th Friday
P5: Period 5 7:00 12:00 Saturday
P6: Period 6 20:00 21:00 Holidays
P7: Period 7 Not used in this example
P8: Period 8 Not used in this example
③ ④ ⑤
① ②
⑥
5 - CONNECT TOUCH USER INTERFACE
Occupied
Unoccupied