CIAAT CTP-3010 Скачать руководство пользователя страница 3

Chapter 1. Important Safety Instruction

1 - 1

This manual provides detail instructions for the safety use of the printer.
Please read this manual carefully before operating the printer to ensure having proper use.

To use the printer safety, please pay attention to the followings:

In this manual, there are notes that require special attention.
For your safety operation, Safety Notices are separated as follows;

It is difficult to forecast all the danger in setting and use of the printer.
Therefore, warnings in this Operation Manual, in the other documents on the printer cannot cover 
all the cases.
In case of performing the operation or maintenance which is not described in this manual, all the 
concern for the safety have to be taken care of at the customer side.
Operation and the notification for the maintenance described in this manual and other documents 
are for the proper use of the printer.
In case of using the printer for the other purpose, all the concern for the safety has to be taken care 
of at the customer side.

Do not perform the operation which is prohibited in this manual and other documents.

The contents that cannot be printed due to a failure while using the use of this printer are not 
guaranteed.

Attention: 

Explanation about the cause of the trouble and the environmental condition.

Caution:

 Inappropriate handling can cause wounds and/or physical damage to the users.

Warning:

 Inappropriate handling can cause the death or serious wounds.

Caution:

 Do not let children to touch the printer or the cables.

                It can cause accidents or electric shock.

Caution:

 Do not place the printer under a humid or dusty place.

                It can cause a fire, electric shock or printer problem.
                Do not place the printer with dust, sand and high humidity such as bathing place, 
                bathroom, hot spring, or on the street.

Caution:

 Do not place the printer on rickety place and/or inclined place.

                Printer may fall down or tumble and it can cause serious injury.

Attention:

 Do not place the printer under the low temperature such as ski yard, skating rink 

                  or open-air with direct sunlight.

Warning:

 Do not put vase, flowerpot, and cup or anything contents water or metric items on 

                the printer. Water spilt or metallic items fall into the printer may cause the fire and 
                electric shock.
                In case the water spilt or metallic items fall into the printer, please turn off the 
                printer power immediately.

Warning:

 Do not block the openings of the printer. In case, the opening blocked, the heat 

                will remain inside and it can cause the fire.

Warning: 

Do not insert or fall the metallic or flammable items into the printer through the 

                 openings of the printer, it can cause the fire or electric shock.

Ʀ

Environments

user manual

CTP-3010

Содержание CTP-3010

























Отзывы: