2
-
POWER
ON
-
INPUT PASSWORD (Factory Setting is “9999”)
-
Open the menu of the KBD controller by pressing “Ctrl”+”Main” Key.
-
Push the joystick to right to enter config menu.
-
Push the joystick downward to choose Baud Rate menu.
-
Push the stick to right/left to and set “9600bps” all of three ports on the menu of
Config.
-
Choose “Save and Exit” and push the joystick to right.
-
Push the joystick downward to choose the “Network” menu and right to enter Network
menu .
-
Push the handle to right to set “Dome(485):” to “Dome” on Network menu.
-
Push the handle to right to set “DVR(232):” to “IDIS ADR(Remote)” on Network menu.
-
Push the handle to right to set KBD/DVR(485) to “IDIS DVR” on network menu.
8) How to setup ADR
Config
Network
DataBank
PassWord
Exit
Key beep : On/Off
Alarm beef : On/Off
Back Screen : On/Off
Key Lock : Off/On
Baud Rate : Dome(485) :9600
DVR (232) : 9600
KBD/DVR (485) : 9600
Dome (485) : Dome/ Dss/ IDIS ADR(Remote)/ IDIS
IDR(Remote)/ DSS No Alarm/ None
DVR (232) : None/ IDIS DVR/ DSS/ IDIS ADR(Remote)/ IDIS
IDR(Remote)/ SDR (Remote)/ PC/ FALCON
KBD/DVR(485) : None/ IDIS DVR/ Duplex/ Triplex/ TALON
Network Menu
IDIS DVR : Command relay fron DVR
IDIS xxx(Remote) : KBD act as a remote control of DVR
Config Menu
