How to install the TVMX2406 controller system with TVDR9 and
TVDR16H
1. How to install:
If user wants to connect with TVDR, please proceed as the following order.
1) Install the dome camera and the controller at the position where user wants to place.
2) Connect the dome camera to the terminal of TVDR to meet ID of the dome camera and
camera input number.
3) Connect TVMX2406 RS-485 +, - of J-Box and RS-485 T+,T- of the TVCD2406 camera.
4) Connect the “DVR” Port of the TVMX2406 controller to RS-232C Port of TVDR.
5) Connect the Tx+ & Tx- of TVDR and KBD/DVR(485)+ & KBD/DVR(485)- of J-Box.
(This cable makes PTZ control from TVDR via TVMX2406)
6) Turn on the power of the controller after all units are set-up.
7) How to setup the controller.
TVDR Remote cable
DVR(232) TVDR (Remote)
TVDR RS232 port
