CiA ERMES2 Скачать руководство пользователя страница 8

Страница: 8 / 32

Programmation

It is possible to operate the menus in two different modes:

using the keys:

fino a visualizzare la voce desiderata

for example:

and pressing:

using the fast selection button:

(Programming)

NOTE In the manual, in most cases, the fast selection key method will be

used. In this manner, during the consultation of the manual, it will be
possible to utilise the sequence of keys beside each Paragraph to
quickly access the programming described within..

Once installation has been carried out and the combiner has been powered up,

select the desired language using

the

and press the

The available languages ar

When on standby mode, having selected the combiner language, the combiners

display the status of the two input channels (CH1 is enabled and CH2 is disabled by
default) in rotation.

This will be displayed:

which alternates with

Once inserted the SIM, the combinatore will carry out the recording to the net of

the telephone manager having visualized:

This is valid for both the Principal Menu, to access any submenu, and within any

of the various submenus, where it is moreover possible to utilise the fast selection
keys to select a given parameter, a given system, and so on.

It is possible in any case to abandon programming by keying

e: Italian,English,French,Spanish,Portugues,German

R e a d y _ . . . . . . . . .
8 - P R O G R A M M I N G

C h 1 R u b r i c a O f f

2 5 ¥ T I M

C h 1 D i s a b l e d

2 5 ¥ T I M

TDC26-TDC36-TM26GSM-TM66GSM-ERMES2- User’s manual

Programmation

As soon as carried out the recording it comes visualized:

In order to activate a cycle of calls on a channel it is necessary that a number

telephone is qualified at least voice “Ch1 Rubric OFF” indicates that to channel 1 is
not associated some telephone number neither for the vocal calls neither for the
shipment of the SMS and therefore turns out not operating.

3.1

Accessing

programming

Programming of the combiner is only permitted from the local keyboard by keying

the

MASTER

code.

( )

Key in the code:

(Default MASTER code)

Press the button:

(Programming)

This will be displayed:

Programming of the combiner allows for:

Voice Directory

16 telephone numbers to which the

Voice Messages

will be forwarded.

Vocal Messages

3 of 11 seconds (common message, channel 1, channel 2) + 12 status messages

of 2 seconds each.

Text Messages

Input and output status descriptions.

Channels

Input, conditions and activation delay settings.

Vocal Messages

6 (in the ERMES2 and TM66GSM) or 2 (in the TDC36, the TDC26 and the

of State

TM26GSM) vocal messages of 15 second ones relati you to the activations of the

channels. 2 vocal messages of 2 second ones relati to you to the two states of
income INT. 12 (in the ERMES2 and TM66GSM) or 4 (in the TDC36, the TDC26
and the TM26GSM) vocal messages of 2 second ones relati to you to the two
states of every income 12 (in the ERMES2 and TM66GSM) or 4 (in the TDC36,
the TDC26 and the TM26GSM) vocal messages of 2

second relati to you to the

two states of every output.

SMS Messages

6 (In the ERMES2 and nel TM66GSM) or 2 (in the TDC36, in TDC26 and nel

TM26GSM) SMS of 100 relative characters you alle activations goddesses
channels 2 SMS of 16 relative characters you ai two states dell' income INT.

12 (In the ERMES2 and in TM66GSM) or 4 (in TDC36, in TDC22 and in

TM26GSM) SMS of 16 relative characters you ai two states of every input.12 (In
the ERMES2 and nel TM66GSM) or 4 (nel TDC36, nel TDC26 and nel TM26GSM)
SMS of 16 relative characters you relati ai two states to you of every escape.

Output

Formulation of the outputs.

Parameters

The function parameters of the combiner are set out in this section.

Codes

Variation of the

MASTER code

and

COMMAND code.

Info

Display of information on the combiner model and the firmware.

I n i t