To configure OUTPUT 2 for FIXED, you must first remove the circuit board from its chassis. To
disassemble, remove the 8 nuts & washers on the RCA jacks, and also the screw in between
them.
Then remove the 4 front panel screws. The assembly will now slide out from the front.
Move the 2 jumpers from pins 1-2 and place in positions 2-3.
Reassemble in reverse order.
Operation
Once all connections have been made, turn the volume control to minimum and the mute/play
switch to MUTE.
Turn on your amplifier and select an active input.
Move the mute/play switch to PLAY and adjust the volume level to your liking, and enjoy the
music!
Inputs:
2
Outputs: 2
Potentiometer Value: 10k ohms
Dimensions: 4.50"W x 2.75"H x 6.75"D (including knob/jacks)
Weight: 4.0 lbs. (actual), 5.0 lbs. (shipping)
handcrafted in USA
Warranty
Your CIAudio Product is covered by our 5 year Parts & Labor Warranty.
To obtain service, contact your dealer, distributor, or our factory.
Channel Islands Audio
567 W. Channel Islands Blvd., PMB 300
Port Hueneme, CA 93041 USA
Phone: 805.984.8282
Email: [email protected]
Web: www.ciaudio.com