Configuration
On the rear panel, there are two pair of stereo INPUTS (1 & 2), and two pair of stereo outputs.
Connect your sources to the inputs. Connect your main amplifier to OUTPUT 1.
Output 2 can be configured for FIXED or VARIABLE operation (see diagram below).
When set to VARIABLE (default), the signal is sent through the volume control and functions
identically to OUTPUT 1. This can be used to feed a powered subwoofer or second amplifier.
When set to FIXED, the output is fed directly from selected input directly to OUTPUT 2,
bypassing the volume control. This can be used to feed a recording device or 2
nd
system.