19
ALMLOG READ:
Select the menu at almlog read mode and then press “SETUP” button.
Press “
S
or
W
” or “
T
or
X
” to page-up or page-down the data which you want.
7.2 Leaving Data Read
Press “Shift” button or switch the rotatory snitch to any position to leave Data Read Mode.
7.3 Clear Data in the Memory
Turn the rotatory switch to the position of “MEM” then press “
S
or
W
” or “
T
or
X
” till the
display shows “CLR” (blinks). Then push “SETUP” button to enter CLR Mode, push
“SETUP” button once to clear all data in the memory then CLR displayed at the center of the
display. All the data are deleted and all the memory counters are reset to 00000.