Chungho Iguassu ICE 500, Руководство пользователя

Страница: 7 / 24

7
2 2.. S Sa affe etty y P Prre ecca au uttiio on nss
●
Do not remove the power
cord by pulling it out of the
wall. Always remove it by
grasping the power plug.
(Damage to the power cord
can cause danger of electric
shock or fire.)
●
This product is for AC
110V/60Hz, 220V/50Hz,
240V/50Hz, and 220V/60Hz
only. After installation, arrange
the power cord so that it will
not be stepped on or stepped
over.
●
If there is dust, water or etc
on the power plug, wipe it off
well.
(There is danger of electric
shock or fire.)
●
Do not put any covering on
the rear and side of the prod-
uct. Blocking ventilation holes
may raise inside temperatures
and cause system malfunction
or even system stoppage.
●
Fix hoses so that the brine water or the water discharged from the drainage hose may not splash into
surrounding areas.
●
Do not install the product in
or around largely damp areas,
at a place near flammable
materials, or at a place
exposed to rain or snow.
(There is danger of electric
shock or fire.)
Symptoms under normal operations
1. During use of product, a murmuring water-flow sound, a rattling ice dropping sound, etc.
may occur during cold water production process or ice production process.
2. Opaque ice may occasionally be dispensed, but there is no abnormality in product perfor-
mance or ice quality.
3. TDSs (Total Dissolved Solids) found in ambient water, cold water, and ice may vary from one
another. (This is a result of the freezing point method.)
4. After the system power source is interrupted and then again restarted, irregular ice cube sizes
may temporarily occur.