6
Pet-immune PIR Motion Dectector
The Motion Contact is designed for use on interior walls and is set to Home Mode
by default. Whenever the Contact detects movement (while the alarm is armed) you
will receive a push alert notification showing the name of the Contact that has been
triggered and the Hub Internal Siren will sound immediately.
LED flashes once
when movement
is detected
Tamper Switch
The Tamper Switch (a black button with a silver spring at the top, located inside this
Contact) is used to indicate an unauthorized attempt to remove its cover.
Whenever this button is released, it will trigger an alarm and the push alert will
notify you which Contact has been triggered on tamper.
Low Battery Indication
If the LED indicator blinks once per 3 second, the battery must be replaced.
Working Mode
Test Mode
The Contact enters a 1 minute settling down period on power up, thereafter
entering into Test Mode. In Test Mode, the sensor detects movement every 10
seconds and emits an alarm signal every time movement is detected. Test Mode will
remain active for 3 minutes, thereafter entering into Power Saving Mode.
Note:
You may also enter Test Mode by pressing the Test Button at the back of the Sensor.
Power Saving Mode (Sleep Mode)
If the Contact detects movement twice within 3 minutes the Contact will
automatically enter into Sleep Mode and no movement will be detected. The
Contact will leave Sleep Mode after a 3 minute period without any movement.
