Guangdong Chuangda Automatic Equipment Co.,Ltd.
16
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
= 0: Knitting will be carried out when the cutter head of the actuator moves upward; welting will be carried
out when the cutter head of the actuator moves downward.
= 1: Knitting will be carried out when the cutter head of the actuator moves downward; welting will be
carried out when the cutter head of the actuator moves upward.
Actuator type
This function is only suitable for 3- function
position
16-segment
step
actuator.
= 0: The needle-selecting blade moves from the bottom of the first row.
= 1: The needle-selecting blade moves from the bottom of the second row.
Second band
This function is used in the following circumstances.
The band represents the number of rows of the jacquard pieces on the needle cylinder. For example, if a
machine has 2000 needles, 8 segment
step
of actuator, the band is 250, however, if the machine has 2006 needles, the
bank only process 2000 needles, and so the machine needs a second bank to process the 6 surplus needles.
= 0: The second band is used
= 1: The second band is not used
Origin sensor
Origin sensor of the conductor (
usually set to 0
)
=0: When it reaches origin, zero sensor switch glows , zero signal is valid
=0: When it reaches origin, zero sensor switch goes off, zero signal is valid
Actuator data format
= 0: Driving the ceramic chip actuator
= 1: Driving the solenoid
electromagnet
actuator
4-1-6 Set Number of Units/Grouping
In this menu, you can enter the number of actuator units control by each group, each port can control up to 72
actuators.
(Fig. 13)
For example, 48-unit 2- function
position
Set number of units/groups
Unit No.
This machine supports 2-position 144-unit and 3-position 72-unit
Next page
Previous page
End/ESC
