Chrysler PACIFICA 2018 Скачать руководство пользователя страница 70

Страница: 70 / 716

CAUTION!

•

The storage bin cover must be locked and flat to
avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

•

Do not sit on the second row seat when it is in the
stowed position with the seatback upright otherwise
damage to the seat may occur.

To Unstow Second Row Seats

For Manual Seats:

To unstow the seat from the floor, move

the front seat all the way forward using the manual seat
adjustment bar.

For Power Seats:

Push the Auto Advance ‘n Return button

located on the B pillar trim (if equipped). Refer to

⬙

Auto

Advance ‘n Return - If Equipped

⬙

in this section for

instructions.

1. To access the storage bin, place the lock rod in the locked

position.

NOTE:

•

Push the lock rod inward for the locked position.

•

Pull outward on the lock rod for the unlocked position.

Lock Rod

GETTING TO KNOW YOUR VEHICLE

Содержание PACIFICA 2018













































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PACIFICA 2018

Отзывы:

Бренды по названию

Популярные бренды

Chrysler PACIFICA 2018, Руководство пользователя

Результаты поиска

Содержание PACIFICA 2018

Отзывы:

Бренды по названию

Популярные бренды