Chrysler Caliber SRT4 Скачать руководство пользователя страница 282 | Manualshive

Страница: 282 / 372

Chrysler Caliber SRT4 Скачать руководство пользователя страница 282

•

If the tire inflates to at least 26 psi (1.8 bar) within 15
minutes, proceed to Step 2 of this procedure.

•

If tire fails to inflate to 26 psi (1.8 bar) within 15
minutes, perform the procedure steps described
under “(G) Distributing TIREFIT Sealant to Better
Enable Tire Inflation.”

•

Press the Air Pump Power Button (3) to

turn off the TIREFIT kit.

2. Remove the Speed Limit sticker from the top of the
Sealant Bottle (1) and place the sticker on the steering
wheel.

3. Disconnect the TIREFIT kit from the valve stem and
place it in the vehicle.

(E) Securing TIREFIT Sealant in the Tire
Drive the vehicle for approximately 5 miles (8 km) to
ensure distribution of the TIREFIT Sealant within the tire.

WARNING!

TIREFIT is not a permanent flat tire repair. Have the
tire inspected and repaired or replaced after using
TIREFIT. Do not exceed 55 mph (90 km/h) until
having the tire repaired or replaced. Failure to follow
this warning can result in injuries that are serious or
fatal to you, your passengers, and others around you.

(F) After Securing TIREFIT Sealant in the Tire:

Turn the Mode Select knob (4) to the Air Mode
position.

1. Uncoil the Black Air Pump Hose (6) and connect it to
the valve stem.

2. Check the pressure in the tire by reading the Pressure
Gauge (2).

282

WHAT TO DO IN EMERGENCIES

«
...
280
281
282
283
284
...
»

Содержание Caliber SRT4





















































































































































































































































































































































































Отзывы:

Нет отзывов