Chrysler Caliber SRT4 Скачать руководство пользователя страница 20

Страница: 20 / 372

3. Depress the power door lock switch to lock the doors.

4. Verify reprogramming by driving the vehicle.

Auto Unlock
The doors will unlock automatically on vehicles with
power door locks if:

1. The Auto Unlock feature is enabled.

2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).

3. The transmission is in NEUTRAL or PARK.

4. The driver door is opened.

5. The doors were not previously unlocked.

6. The vehicle speed is 0 mph (0 km/h).

The Auto Unlock feature can be enabled or disabled.
Refer to “Personal Settings” (Customer Programmable

Features) in the Electronic Vehicle Information Center
(EVIC) — if equipped section of this manual.

For vehicles not equipped with the EVIC the Auto
Unlock Feature can be enabled or disabled by performing
the following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON and
back to LOCK four times ending up in the LOCK
position.

3. Depress the power door UNLOCK switch to unlock
the doors.

4. A single chime will indicate the completion of the
programming.

NOTE:

Use the Auto Door Locks and Auto Unlock

features in accordance with local laws.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание Caliber SRT4





















































































































































































































































































































































































Результаты поиска

Содержание Caliber SRT4

Отзывы:

Chrysler Caliber SRT4, Руководство пользователя, Страница: 20 / 372

Результаты поиска

Содержание Caliber SRT4

Отзывы: